øAslickproductions.org/forum/index.php?PHPSESSID=5f0fck550j2m4m2fpbtkj2vkm1&action=profile;u=347;area=showposts;sa=topics;start=30e:/My Web Sites/Slick Productions - FFIV Message Board/slickproductions.org/forum/index26e2.htmlslickproductions.org/forum/index.php?PHPSESSID=5f0fck550j2m4m2fpbtkj2vkm1&action=profile;area=showposts;sa=topics;u=347e:/My Web Sites/Slick Productions - FFIV Message Board/slickproductions.org/forum/index26e2.html.zx ñg^ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿȰUGƒOKtext/htmlISO-8859-1gzip0|ÖGƒÿÿÿÿÿÿÿÿTue, 10 Mar 2020 20:13:21 GMT0ó°° ®0®P®€§²ð® ñg^ÿÿÿÿÿÿÿÿA$Gƒ Show Posts - Bahamut ZERO

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Bahamut ZERO

Pages: « 1 2 3
31
Final Fantasy IV Research & Development / Mapping Questions
« on: June 29, 2015, 05:09:26 PM »
Before I ask my few questions, here's a little info on what I've been doing with the Map Editor. If you're not into reading a short novel, skip down past the "---" lines to get straight to the questions.

-----------------------------------------------------------------
The last couple of days I've been experimenting with the Map editor in FF4kster trying to get a grasp of what saves or uses more map space. At first I was a bit confused on why certain things use more/less than others, so I tried a few tests:

1:Combining Shops - my first thought was having weapon/armor shops be on the same map, seperated by 7 tiles (as the player can only see the first 7 tiles ahead of them in any given direction). At first, I thought this was a success, as I noticed the number climb up a bit.. until I realized I had deleted armor shop maps from two places instead of just Troia (my guinea pig map for this experiment). After remaking Agart's armor shop, I ended up with less space than I started. - BUST

Result: Two Tiny maps use less space than one medium-sized map.


2:Adding trees - as odd as it sounds, placing trees in areas where the player wouldn't be able to walk anyway frees up little bits of space (my guess is that the tree tiles have less info tied to them in the Tileset editor, plus they're unwalkable). I got rid of the hidden path in Baron town and closed of the side exits, and got a nice bit back! Plus Cid's got a backyard now, heheh. - Success!


3:Remaking Maps that have spots players never see - Remembering Grimoire's advice about freeing map space in another thread, I set out to remake Kaipo. Using a two-tiled tree as a focal point north of the hospital, I found out that the top three rows are never in view, making them wasted space. After remaking the map
tile-by tile,  I ended up with roughly +20-50 somethings of map space, and now the player can explore a bit more of Kaipo's outskirts to boot. - Success!


4:Removing maps altogether - A no brainer for freeing up map space. Removing the Training Rooms alone gave me a whopping +300 or more somethings (bytes?) of map space to use.  If the save rooms in the towers use seperate maps, one of those could be easily nixed, or even Babil's crystal room (if it's a seperate map from the one in Lunar Casle that is).  - (obvious) Success!
--------------------------------------------------------------------------------

Alright, with that random (perhaps useless to most who already know?) info out of the way, here are a few questions on my mind:

1:How many NPCs can be on one particular map? I imagine the highest would be 15ish, but I'm not sure.

2:Is there limit to how many NPCs  that can be on the maps altogether? By that I mean as in how there is a limit to the total amount of triggers one can use.

3:Is there any sort of Copy/Paste capability to the Map Editor? I doubt there is, but if so, it would be wonderful to know!


I had a fourth question to ask which would have been the most important, but I figured it out on my own literally as I was typing. *facepalm*

Fun Fact: Judging by how Damcyan's map is set up, as long as every building's inside uses the "bent arrow" trigger tile in a given town/map, you can take away the transfer triggers to the Overworld completely. This way, instead of having to use triggers to warp out of say, Kaipo, the player can just walk off of the map's boundries to go to the Overworld (like how Damcyan castle does it)!

32
Gaming Discussion / To Celebrate FF7Remake's E3 Announcement
« on: June 26, 2015, 01:30:36 PM »
I present a teaser pic of a new weapon in my parody project, Final Fantasy IV.5 FU ReMIx.

 The Buster Sword!

It has 15 attack power, and replaces DK Cecil's second Dark Sword. It is effective against multiple races of enemies, making it useful far past the point that you'd currently find it (in a trapped chest found at a newly accessible spot in Watery Pass). Also, since I'm using Grimoire LD's Imbued Weapons mod, it can randomly use DK Knight Cecil's Dark Wave skill when attacking.

That's right. There's now a Buster Sword in Final Fantasy IV, and it can essitially do Blade Beam. If hell hasn't froze over from FF7R's E3 announcement, it has now.

I used a picture of FF7's ingame Buster Sword model as a reference. If you zoom in, it even has Materia slots.  :cycle:

Also, don't worry about the names, they are still "Rosa" and "Edward". I was just playing around with some squish tiles I added to the Namingway screen.

Note: I didn't go and make a Buster Sword because of this announcement. This was actually a request from a good friend of mine, it just happened to be a few weeks before E3 that I made it.

33
I've been wracking my brain the last few days on just how to go about recreating the Developer's Rooms after finding out that the Map Editor won't save any changes I try to make to the Glitch World maps where the DR's originally were.

At first I thought FF4kster just wouldn't make changes to a map labeled -Glitch World-, so I changed thier names via editing a config file. That had no effect (though's it's nice seeing thier names in the editor now haha).

I've been trying too change other maps labelled -Glitch World-  in hopes some of them do save correctly, but so far I've had no luck.

Then an idea struck me: What if these can't be currently edited because they aren't considered "Valid Maps" compared to normal maps? If that were the case, how does the game differenciate between "Valid" and "Invalid" maps? Though that's on my theory that the game even does..

Can anyone offer me any information regarding this? I'm quite curiois as to how the game defines what the difference between a normal, editable map and a non-editable Glitch World map.

Or as a workaround, are there doubles of certain maps that aren't neccessary that I could safely butcher, to remake the Developer's Rooms without the player noticing that they were gone?  Such as some of the empty rooms found in the Sealed Cave, for example (assuming that they aren't actually the same maps). I'd rather do that as a last resort, being as this is for Namingway, and not FU ReMIX.

Any advice would greatly appreciated!

34
I was wondering if it is possible to use the Weapon Swing animations  for some created skils.  I have a feeling it would take some info gathering to make this happen, so I thought I'd ask here.

Why would I want to do this? Well, basically I'm trying to make a new Sword type that randomly uses the arrow-shooting animation as a skill via Grimoire LD's MAgic Weapons mod.

Any info at all on this matter would be immense help to me.

35
Awhile back I ported the JP version of FF4's save graphics over to the project I'm working on. For the most part this quick copy/paste job was a succees, minus the save graphic used in the Caves Tileset.

The save graphic for the caves tileset is a campsite-esque looking thing which is also used as a bloodstain-esque looking thing in the Sealed Cave tileset (they're both seperate graphics, though).  In the JP version's Caves Tileset, the Save Graphic is the same color as the cicle of stones that surround it, yet when ported to the US version, it has the same bright red colors as it would with the Sealed Cave's normal palette.

At the time it didn't really bother me much, but now I'm quite curious to find out what's going on here.

Taking a look at the tileset in YYCHR using a savestate, I noticed that all the 8-color palettes used for the normal maps are loaded into YYCHR's palette selecter, making me wonder: Are the numbered palettes I see in FF4kster's Tileset editor (1-32) just combinations of these 8-color palettes?

Or to better clarify - Is there a way I could change a tiles 8-color palette in one of the numbered map palletes?

Basically I want to change the palette that the save graphic uses in Map Palette 14 (based on the hex numbers that YYCHR are showing me) from:

78 79 7A 7B 7C 7D 7E 7F

To:

60 61 62 63 64 65 66 67


It would then look exaclty like what I see when messing around in the JP version of the Watery Cave.

36
During the last week or so I've been going through and doing a speed run of my project to make absolutely sure that it is fully finishable from beginning to end without any major game-breaking errors due to my setup of mods. For the most part, it is, but unfortunately I've come across a few  minor bugs and one major issue, so I figured it would be best to ask about these errors and see if anyone esle has come across certain issues such as these, or could share any kind of information or theory as to what may be going on.

As for my setup of mod, I am using the following (patched in this order).

(add header)
Chillyfeez's User options 2.2 + B button Dashing
(remove header)
Grimwoire LD's Magic Weapons
Grimwoire LD's Imbued Weapons
(add header)
Chillyfeez's Shadow Mod
User Options + Shadow Mod Compatability Patch


Here are the bugs/general oddity's I'm experiencing.


Oddity 1: I found that after getting Paladin Cecil and saving, the HP section of the save slot with Paladin Cecil reads 0/0, or if there is a file with Dark Knight Cecil in the party, it displays the HP from that file instead.

 Oddity 2: For some odd reason, The "Small Dock" background used in the "Airship Docked"  map displays 3 tiles to the right (although it seems it's the graphics and not the tiles themselves, seeing the characters still walk around as if everything was normal). For most of the few events using this map, it looks a bit funky but doesn't seem to affect the game's progression. The    event in which Cid attaches to the drill to the Falcon, however, pretty much falls apart at the point that this map is loaded, but taking out the chunk of the event that  loads the map and the parts with Cid running around it allows the event to play out.

 Oddity 3: For some other odd reason, the "Dwarf Tank" map has the same issue as the "Airship Docked" map, with the map displaying 3 tiles to the right while the characters/NPCs are uneffected. It doesn't seem to break the events it is used for, it just looks weird.

 Oddity(?) 4: When walking on the Moon's overworld and poisoned, the pixelation effect doesn't occur. I'm not enritrely sure if that's a bug, or if that effect is just normally disabled when on the Moon. Though running around while poisoned but without the screen effect makes me ponder the feasiblity of step sounds  purely out of curiousity.
 
 Oddity 5: After getting past the Giant of Babil and returning to the Moon with Kain in the party, the game crashed when I  opened the menu while on the Moon's overworld. This was after  just being in the Huumingway's Cave, and going into the menu multiple times (while still in the Hummingway map). This also corrupted my save file, making this one doozy of a bug. I have a feeling that Oddity 1 and possibly Oddity 4 are playing a part in this occurance, but that is going off of a hunch.


Any sort of info/theories on these would be immensely appreciated!

37
Gaming Discussion / Final Fantasy IV (SNES) Info Request
« on: April 28, 2015, 04:28:50 PM »
I've been wracking my brain trying to come up with a way of allowing players to switch between Dark Knight Cecil and Paladin Cecil without the need for having it be an event, potentially causing one to be SoL in a dungeon (as well as make events a little weird later on).

I was wondering - is it possible to switch actors mid battle? If so, would it be possible to tie this to a command?

Basically, I'd like to give both Cecils a command allowing them to switch back and forth mid-battle freely, sort of like Terra's Morph command if FF6.

I figure since in my project Cid won't have the scan/peep command, I could use it's space for this instead.  If possible, I would have it  blacked out  for Dark Knight Cecil until the flag for the Paladin Transformation event is set, thus enabling it's use for both of them. This flag would be set after the fight with DK Cecil, for safety/sense reasons.

Now the thing is - i've never laid eyes on a hex editor, let alone have experience with one. Are there any reccommended tools or info anyone could point me to in order to tackle this endeavor? 





38
For my parody project I'm working on, I want to use the Mysida Legend IN SPPAAAACE visual as the very first thing that occurs when you start a new game, with different tect basically mocking the start of a Star Wars movie, but laying out some basic info on the state that the world of FF4 is in.

Now, I've got the visual going fine and all, and it doesn't cause any wierd behavior with the opening, it's just... I have no idea on how to edit the text. At first I tried editing the normal Mysidian Legend's text, not knowing that the text used in the IN SPAAACE visual is called from somewhere else. I've skimmed through Bank 1 and 3 in hopes of tracking it down, but so far no luck.

Is it currently possible to edit the text in the Mysidian Legend IN SPAACE via FF4kster? If so, boy would I be giddy as a five-year old!


Also, if anyone is interested, or currently trying to track down the message boxes for the normal Mysidian Legend, or the Prologue text for whatever reason, here they are:

Bank 1, Message 465 = Prologue text when Cecil and Kain leave Baron

Bank 1, Message 363 - The normal Mysidian Legend, told by the Elder.

Pages: « 1 2 3