øAslickproductions.org/forum/index.php?PHPSESSID=5f0fck550j2m4m2fpbtkj2vkm1&action=profile;u=347;area=showposts;start=240e:/My Web Sites/Slick Productions - FFIV Message Board/slickproductions.org/forum/index8362.htmlslickproductions.org/forum/index.php?PHPSESSID=5f0fck550j2m4m2fpbtkj2vkm1&action=profile;area=showposts;u=347e:/My Web Sites/Slick Productions - FFIV Message Board/slickproductions.org/forum/index8362.html.zxñg^ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÈ ,/rÉOKtext/htmlISO-8859-1gzip8:ÖrÉÿÿÿÿÿÿÿÿTue, 10 Mar 2020 20:13:13 GMT0ó°° ®0®P®€§²ð®ñg^ÿÿÿÿÿÿÿÿŒ+rÉ Show Posts - Bahamut ZERO

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bahamut ZERO

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 »
241
Final Fantasy IV Research & Development / Re: 4bpp Graphics Backport
« on: August 13, 2015, 05:17:56 PM »
This is some amazing work man! Seems to work with my project quite well. Definitely cool to see enemies on the level as character battle sprites BPP-Wise!

I'd love to incorporate this into my project when it hits it's final stages (which admittedly won't be for a long time). But until that point I'll defintely use it while I test it out (yay, backups!).

One question (for the time being anyway):  Are the Weapon graphics still in 3BPP? 

EDIT: Nope, still 3BPP. :)


Hmm, that's odd...  my edits to weapons graphic aren't working properly (example: instead of seeing my edits, I'm still seeing the vanilla weapon graphics).

Other than that I'm seeing no problems or conflicts, which is very awesome!


EDIT 2: *facepalm* nevermind, just found a 4BPP version of the weapon graphics haha. Works like charm. :)

242
Final Fantasy IV Research & Development / Re: Limitations of Mode7
« on: August 12, 2015, 01:47:29 PM »
Never hurts to have more to reference to! 

One quick question - when using the disassemble funtion of Geigers,  should I leave the 8 Bit Accumulator and  8 Bit X/Y Registers checked?



I think I have an idea on how to track down (at least some part) of the Mode7 data. I'm going to set an event up to Load to the Worldmap (on Falcon) and play the "Airship Bombing Damcyan" visual to recreate the funny glitch I mentioned in my OP. Basically two Mode7 effects are trying to play simaultaneously (since I'm on the Overworld in the Falcon before tunneling out of the Underground, it'll play it's little Mode7 event immidiately after the transfer).

Hopefully I'll find out something interesting while amusing myself!


Hmm  using Vetcor Info I found this:

Code: [Select]
IRQ $00:FFFF $00:0204
NMI $00:FFFF $00:0200
RES  $00:8000


And when I do a dissassembly at these addresses:

Code: [Select]
Disassembly:
$00/0200 5C 85 90 00 JMP $009085[$00:9085]   A:00F0 X:01D8 Y:0000 P:eNvMXdizc
$00/0204 5C 60 92 00 JMP $009260[$00:9260]   A:00F0 X:01D8 Y:0000 P:eNvMXdizc


According to some of the info I've read from the ASM tutorial, IRQ and  NME are both interrupts, using absolute long jump opcodes. So it seems my little setup causes the game to use the same opcode twice to two different locations, and it causes things to go all kinds of wackadoo (zoom effect continues until there are many doubles of the current surroundings boxed in,  it seems to cycle through this effect twice over before the Damcyan bombing visual takes place. I've attached a screenshot of this in action for better undestanding.


Not sure how useful that is for what I'm looking for, but having some inkling of what I'm looking at is pretty exhilarating.  :banonsmash:




243
If the multi-lettered tiles you're talking about are being used for a spell or item name, it's definitely a squish tile.  I use squish tiles in my project like they're going out of style (but I use a skinnier font so in most cases they fit pefectly without a "Squished" look).


The following places can use Squish Tiles:

Classes
Actor Names
Command Names
Weapons
Armor
Spells
Items
Item descriptions (this can save a good deal of space)
Location Names (ones that pop up  when you first enter a map)
Battle Messages

There's a fairly large chunk of free space where the font is in rom, and 99.9% of the time doesn't effect the DTE table (so far I've only seen one occurance of intterference, and that was making a squish tile at A4). Other then A4 I've had no trouble adding squish tiles and extra icons.

If you're wanting to add some,  I have a graphics thread on here that has a list of (unheadered) offsets, including the font, as well as a zip file containing a palette for the font to help speed others along.  :cycle:  Should be attached to the first post if I remember correctly.


And using them in FF4kster's a breeze to set up - just open up the "font" file in FF4lster's config folder via notepad and add them to the list. Then hit the corresponding key in the editor to use!

If you get to a point where you're running out of keys to set tiles to (as I did) a good tip is to make a folder and have multiple Font config files that you can copy/paste (example - one that's a backup of the normal Font file, then ones for squish tiles and another for Icons)




244
Final Fantasy IV Research & Development / Re: Limitations of Mode7
« on: August 11, 2015, 02:16:57 PM »
Hell yeah! I'll start sifting through this wealth of information and see what I can garner from it.


Just taking a quick look I appear to see answers to multiple things I was pondering the possibility of! Mostly changing vehicle BGMs and keeping the Black Chocobo around after you catch it.  Granted I won't have any immmediate use of the vehicle BGM changing (as further down the line I plan on nixing a number a tracks for different things),  I've been dying to edit the black chocobo and this info gives a reason to go through with that!

But yeah, definitely will be looking through all of this. Thanks!  :happy:

EDIT:  Not much on the Mode7 front,  mostly due to pouring over an assembly tutorial I found at SMWCentral so I can finally know what I'm looking at in Geigers opcode-wise.  As a test I did your edit to the Black Chocobo, which after adding a header to my my rom I was successfully able to do, using a handing opcode chart found with send tutorial.  I changed the wrong value at first, and got treated to a funny palette change + transfer to the moon afterwards XD. I'm having a good bit of fun with this.

245
Final Fantasy IV Research & Development / Limitations of Mode7
« on: August 10, 2015, 11:47:44 AM »
This is something I've pondered ever since causing a rather funny glitch concerning Mode7 (using multiple visuals to cause all sorts of mayhem  :laugh:).  What are the limits to the Mode7 effect used on the Overworld maps? Or to be more precise - is there a way to play around with the zoom/angle effects?


I mostly ask this out of pure curiosity, but I also ask because I want to play with the zoom effect used by the Sight spell and see if there's a way I could rig the overworlds up to be slightly angled when walking around on foot.




246
Awesome! Thank you very much!

247
After 101 sidetracks, I finally got around to trying out the Dialogue window edits... and oh my god man I love it haha.  It just looks so much more natural for 90% of the scenes!

That being said, have you made any headway with making the message box's position switch-dependant?  The kind of control that would bring would be nothing short of epic!


248
Doenloading imediately!  :cookie:

249
It's just the Timecave one that's been available for a while.

Also, I know I said I was going to move on to other things, but... I feel really bad leaving FF4kster without at least finishing overworld editing. Especially since that's been all thoroughly researched and should be fairly straightforward to add, it's just a matter of the interface for the wide tiles. So I think you may not have seen the last of me just yet.

Reading that just made a good day even better!

250
Well, this is odd... upon an in depth checking of my backup last night, I found that it was as up to date as the broken one, minus a map I had started working on (which was fomally the generic Weapon Shop map), so I think I'll chalk it up to bad luck and breathe a heavy sigh of relief.  :happy:

To be safe, I'll make a new map somwhere else, in case that had a part in it haha.

Also while testing in FF4kster, I found that if you do the following:

1:Go to an NPC in the NPC Editor with "EMPTY" set as it's speech

2:Hit Tab to highlight the messages area

3:hit Tab again to go back to the "Empty" section (now glitched into a small square box)

4:Hit Enter


The editor will crash. For good reason I imagine, but still I think it's worth mentioning lol.




I use a similar technique sometimes when debugging FF4kster. One way to speed things along is to "binary search" your way through them instead of just going linearly:
  • Assign an order to the changes.
  • Apply all the changes in the "first" half
  • If the problem appeared, the culprit is in the first half; discard the other half
  • If the problem didn't appear, the culprit is in the other half; discard the first half
  • Revert your rom to its original state
  • Repeat entire process until you're down to one item; that's the cause of the issue.
This way you eliminate half the list at a time instead of one at a time.


That's a good way to determine a problem quickly! I'll keep that in mind in the future.

251
Hmm, looks like I'm going with the painstaking route, as the data in hex is correct. At least I know it's something on my end messing it up, so that puts me more at ease with redoing things one at a time. Thanks for the help!

252
Could the event pointers have gotten messed up somehow?

Do you have a save game you can load, and try to trigger an event?

From testing different events on my saves (even going as far as setting up the Baron Dancer to trigger the Opening events) everything seems to be working fine event-wise. I'm pretty sure it's the New Game's pointer that's pointed incorrectly.

I'm not sure if that was caused by the editor, but the latest major edit I've done to events was:

1:Mt. Ordeals Fire Put Out By Palom - removing the chunk of event with Golbez, Kain, and Milon, so theevent ends after the fire's put out.



That is worrying... try this...

$00/8081   A9 10   LDA #$10   A:0081   X:21E0   Y:00F0   P:eNVMxdizC - Add 10 to A (Starting Events)
$00/8083   20 63 DF   JSR $DF63  [$00:DF63]   A:0010   X:21E0   Y:00F0   P:enVMxdizC - Jump to Subroutine (Event Dealings)

In Rom this is at...

281 - A9 10 - Starting Event.


Change the event that is designated as the "starting event" and see if it still occurs.


I'll make a backup and then try this out. This is the code that New Game normally calls for the Opening Events to start, correct?

253
I'm using the latest time cave version of the editor, the one with the Namingway issue fixed.

254
I noticed last night when I went to start a new game of my project. that it hangs before the opening events (using SNESx9).

MID-POST EDIT: I loaded my projoec with ZSNES and noticed exactly what's going on: For some reason or another, selecting New Game takes me to the item screen that's usually called after a battle. Then it hangs indefinately. What the hell?????

What worries me is... well, there aren't really any differences between my current version and my last backup backup (which is from a few days prior). Only noticble things between the two are:

1 I have altered the text from the events where DK Cecil's speaking to the Elder (twins joining) through returning from Mt.Ordeals.

2: At spots in these events where Porom would hit Palom, I've removed the "POW!" textbox and added a 4 cycle pause in it's place

3: During the event where Palom puts out the Fire on Mt.Ordeals, I removed the text during the scenes with Kain & Golbez (since I plan on having something else          happen in it's place)

4:  When Milon's sprite is falling off the cliff, I have his second text box (graaaaaaahhh!!)  occur after his sprite falls.

5:  a few small edits to the Caves and Sealed Cave tileset graphics (which I'm 99.999% sure aren't the cause)


I'm certainly no expert on FF4's data structure, but I don't see why any of the above would affect my New Game option in such a way. I'm somewhat (well, completely) stumped as to why New Game's calling up the After-battle item screen instead of calling the "Opening events" event.


Any advice, theory, or info  on how New Game sets up the opening events would be greatly appreciated. Heck, if anyone wants to take a stab at looking at my rom for clues, I'd gladly send it and my most current working backup their way. 
 






255
Quote
Well that is good to hear, I imagine the line "Treasure your taco." will be in the game though as it is in your signature. Regardless I was worried there but if you've scaled back the parody aspect then it sounds like your mod may stand on its own.

Actually it's a line that was in the old version (from before I began using yuor's and chillyfeez's mods) that I'm gonna scrap once I fix a major problem I'm currently experiencing. But it'll live on in my signature haha.


Quote
As for the party switching idea, I was throwing around that if it called for early, you could have the Tent be your party changing location. Breath of Fire 3 does this and I always liked the way it was handled in that game. I am glad to hear my conditional branch hack is working well for you... you did download the fixed one, right?


You know, that's a pretty cool idea!  You also just mentioned one of my favorite RPGs haha. Since in FU ReMix the need for party changing comes into play roughly  around the Dark Elf's cave, I'm thinking of making a room that would hopeilly fit well to be used for while on the airships and in the Lunar Whale. Since now I can use events to handle tranfers, I'm planning on using a slot in the Overworld maps to accomplish this, since I've already freed up a fair number of NPCs and triggers getting rid of some of the dancers and some of the black chocobos in the Troia Chocobo farm.

Which reminds me of an idea I want to try out using the chocobo forest and one of the Inn events.   :wink:



And yes, I've downloaded and patched the current version of your conditional branch hack, and it works beautifully!  It fixed the rollback proplem I was having with one of my later events, as well as fixed the NPC1-wanting-to-move quirk of the original. Truly fantastic work!


--------------------------------------------------------------


For a graphics update, I've been playing around with the Sealed Cave and Cave tilesets.


Sealed Cave: I've made a pole out of the little stone thing used to surround save points, for use with the animated fire that the Skull torch uses.
(I'll probably do some edits for the stone things in other tilesets that have them as well, as I find them somewhat useless).

Caves: I redid the broken-rock-thing to look like a stalagmite/stalagtite (whichever of those that forms from the ground, pointing upwards). The water version of the bas still needs a little work, but other than that I'm pretty happy with it.



After I play around with them some more, and possibly do some other edits, I'll post them up. I won't get to that until I figure out a nasty problem which I'm about to write a post about, but they'll hopefully be good to go in the near future.




Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 »